Add Products To Quote Cart To Get Best Price

Cart:

0 item(s)
You have no items in your shopping cart.

0

Call Toll Free: 1-800-258-3652

Transducers

8 Item(s)

Grid  List 

  • Theta 60R RTD Temperature Transducer (PT100)

    Theta 60R RTD Temperature Transducer (PT100)

    The DIN rail mount Theta 60R converts the resistance value from a PT100 RTD into an analog signal for display, recording, or monitoring. Range and calibration is handled through a series of DIP switches and potentiometers. There are two model available that can handle two, three, or four wire RTD's....
  • Theta 20A/20V AC to DC Transducer

    Theta 20A/20V AC to DC Transducer

    The Theta 20A/20V is used to measure and convert an AC Voltage or Current input signal to a load independent DC Voltage or Current signal. Programming can be handle through the front keypad, COM port using an adapter cable, or optional RS-485 output. Green or Red LED's indicate power and output type...
  • Theta 10A/10V AC to DC Transducer

    Theta 10A/10V AC to DC Transducer

    The DIN Rail mount Theta 10A/10V is used to measure and convert an AC Voltage or Current input signal to a load independent DC Voltage or Current signal. Choose the option which best works for your application.
  • Theta 30P Power Quality Transducer

    Theta 30P Power Quality Transducer

    The Theta 30P measures and converts active, reactive, apparent power, phase angle and power factor in both single phase and three phase AC systems. Balanced or unbalanced loads are transmitted as a voltage or current output. Programming is handled through the front keypad using available display, C...
  • Theta Hz Frequency Transducer

    Theta Hz Frequency Transducer

    The Theta Hz transducer takes the measured frequency sine or distorted wave and converts it to a linear analog output. The output signal can be set to a voltage or current signal through DIP switches located on the main PCB. Programming can be handled through via the front LCD, COM port using the ca...
  • Theta 50 Isolation Transducer

    Theta 50 Isolation Transducer

    Dealing with DC ground issues or interference that provide false measurements? The Theta 50 measures the suspect DC signal and provides isolation through two available analog outputs. The isolator addresses the concerns of electromagnetic compatibility EMC and safety according (IEC 61326-1 and IEC ...
  • Theta 40 Multi-variable AC to DC Transducer

    Theta 40 Multi-variable AC to DC Transducer

    Measures several variables of an electric power system such as current, voltage (rms), power factor, apparent power, reactive power and converts them to DC analog or digital signals depending on which model is selected. An RS-232 serial interface lets you program for single phase, three wire, or fou...
  • Theta 60M Universal Transmitter

    Theta 60M Universal Transmitter

    Converts a DC current, voltage, or a signal for a thermocouple, resistance thermometer, remote sensor, or potentiometer to a linear analog output signal. Measuring inputs are broken down into ranges by using a series of terminal configurations. Programming is handled through the PC with the configur...

8 Item(s)

Grid  List 

© Hoyt Electrical Instrument Works Inc. All Rights Reserved.