2950 CL AC Clamp Meter with DCV function
Pocket size. 4000 counts.
Full automatic measurement: Voltage, Current and Resistor measurement.
Diode measurement.
Data hold function. Select function. Auto off function.
Continuity check.
Low battery indication.
Flashlight (Auto off in 1 minute).
ALS-2 AC Line Separator
x10 Model allows for more accurate measurements of low amperage devices.
Direct reading x1 mode.
4mm Voltmeter input jacks.
Intergrated ground conductor.
10 amp capacity.
10cm plug cord for greater flexibility.
2950 CL AC Clamp Meter with DCV function
ACA: 40.00A, 400.0 / 1000A
ACV: 40.000 / 40.00 / 400.0 / 750V
DCV: 4.000 / 40.00 / 400.0 / 1000V
Resistance: 400.0Ω / 4.000kΩ / 40.00kΩ, 400.0kΩ / 4.000MΩ / 40.00MΩ
Continuity: Threshold level (beep sound) less than 25Ω
General
Overload Protection: AC V : 750Vrms / DC V : 1000V / Diode & ohm : 250Vrms.
Conductor size: 35mm Max.
Low battery indication: Sign appears on the display.
Response time: Approx. 2 times per second.
Operating /Storage temperature & humidity: 0ºC ~ 40ºC / 0ºC to 50ºC | 80% R.H. max.
Battery life: Approx.100 hours on continuous use.
Dimensions: 183(L) × 62(W) × 20(D)mm.
Weight (battery Included): Approx. 123g.
Power source: CR 2032 (DC 3V) × 1.
Safety Standard:
EN 61010-1 CAT II 600V
EN 61010-1 CAT III 300V
EN 61010-2-32
EN 61326-1
ALS-2 AC Line Separator
Input plug: Europe
Output socket: 3 prong U.S. standard
Cord length: 10cm
Max. Voltage / Ampere rating: 250Vac(±10%) / 10Aac
Operating Temperature & Relative Humidity: 0℃~50℃ Max.80%R.H.
Weight: Approx. 135g
Dimensions: 145(L) x 55(W) x 35(D)mm