Analog (1kV below) Insulation Tester.
High quality Taut Band movement.
Three insulation test voltages (DC): 250V, 500V, 1000V.
Two ranges for continuity test: 2Ω & 20Ω
Compact and lightweight
AC voltmeter with linear scale up to 600Vac
200mA continuity short-circuit current
1mA test current on insulation test at nominal voltage
Automatic discharge of capacitive and inductive circuit with charge stored in the circuit under test
Live warning and display of external voltage presence
Fuse, air gap, crowbar and overload protected
On line battery monitoring shows if battery is ok
Manual zero ohm adjustment
Low battery consumption
Push and turn locking switch for continuous and hand free testing
BS 16 edition.
Accessories
Instruction manual,
Test leads,
Batteries,
Shoulder belt,
Soft pouch (Optional).
Insulation Resistance
Test voltage (DC V):250V / 500V / 1000V
Output voltage on open circuit: Rated test voltage +10%
Measuring ranges: 0-100MΩ / 0-200MΩ / 0-400MΩ
Mid-scale value: 1MΩ / 2MΩ / 4MΩ
Scale multiplier: ×1/2 / ×1 / ×2
Accuracy: 2± 5% of indicated value
Output short circuit current: 2mA DC
Power consumption: ≥ 1.0mA
Continuity
Measuring ranges: 2Ω / 20Ω
Zero Ω adjustment by knob
Output short circuit current: ≥ 200 mA
Accuracy: ± 1.5% of scale length
AC Voltage
Range: 0-600V AC
Accuracy: ± 3% of scale length
General
Warning light circuit live lit From 90Vdc / 70Vac, Buzzer beep from 24V ac/dc
Battery check indicate good batteries from 8.5Vdc to 13Vdc during a load test of 250mA.
Battery OK LED lit from 8.5Vdc and is operative while testing
Dimensions: 175(L) × 85(W) × 75(D) mm
Weight (battery included): Approx. 650g
Power source: 1.5V (AA) × 8
Safety Standard
EN 61010-1 CAT III 600V
EN 61326-1