Cable Tracer
Trace wires or cables.
Volume control.
Tip & Ring identification.
2 bi-colored LEDs (Line 1 & Line 2).
Tone speed selection: Fast & Slow.
A phone jack is designed for headset or handset (Amplifier probe).
Digital Multimeter
4000 counts.
ACV, DCV.
Ohm, Diode, & Continuity testing.
Auto-range.
Data hold.
Low battery indication.
Select function.
Auto-off.
AC Voltage
Range: 400mV / 4V / 40V / 400V / 750V
Resolution: 0.1mV / 1mV / 10mV / 100mV / 1V
Accuracy: ±(1.0%rdg+5dgt)
DC Voltage
Range: 400mV / 4V / 40V / 400V / 1000V
Resolution: 0.1mV / 1mV / 10mV / 100mV / 1V
Accuracy: ±(0.5%rdg+3dgt)
Resistance
Range: 400Ω / 4kΩ / 40kΩ / 400kΩ / 4MΩ / 40MΩ
Resolution: 00.1Ω / 1Ω / 10Ω / 100Ω / 1kΩ / 10kΩ
Accuracy:
±(1.2%rdg+3dgt) for range 400Ω - 4MΩ
±(2.0%rdg+4dgt) for range 40MΩ
Continuity Test
Range: 400Ω
Audible threshold: Less than 25Ω
General
Frequency detection: Amplifier Probe: 1Hz~12kHz / Frequency detection Tone Generator: 1kHz±15%
Over protection: Tone Generator: 80V DC
Alternating tone: Fast and Slow
Connection: Tone Generator: RJ11 connector, alligator clip x 2
Sensitivity control
Receiver distance: <50cm
Operating Temperature & humidity: 0°C~40°C ≤80% R.H.
Storage Temperature & humidity: -10°C~50°C ≤80% R.H.
Dimensions:
- Amplifier Probe: 230(L) x 56(W) x 27(D)mm
- Tone Generator/DMM: 183(L) x 82 (W) x44(D)mm
Weight (battery included): Amplifier Probe: 125g / Tone Generator/DMM: 305g
Power source: Amplifier Probe: 9V(6F22) × 1 / Tone Generator: 9V(6F22) × 1 / DMM: 1.5V(AAA) x2
Safety standard: EN 61010-1 CAT Ⅲ 600V, EN 61326-1 EN 55011, EN 61000-4-2, EN 61000-4-3