Lan Cable Tester
Designed for RJ45/RJ11 modular cables, 10/100 base-T cable and Token Ring cable etc
The LAN cable tester can verify cable continuity, open, circuit and miss-wired.
The remote receiving unit is available for installed cables far away either on the wall plates or on the patch panels.
Auto and manual scan function.
Ground wire test.
Display : LED indication for wire status.
Digital Multimeter
4000 counts LCD.
Full automatic measurement: Voltage measurement, Resistor measurement.
Range change function.
Select function.
Data Hold function.
Continuity check.
Diode measurement.
Low battery indication.
Input impedance:10MΩ.
| |
Range |
Resolution |
Accuracy |
|
AC Voltage |
400mV
4V
40V
400V
750V |
0.1mV
1mV
10mV
100mV
1V |
±(1.0%rdg+5dgt)
|
|
DC Voltage |
400mV
4V
40V
400V
1000V |
0.1mV
1mV
10mV
100mV
1V |
±(0.5%rdg+3dgt)
|
|
Resistance |
400Ω
4kΩ
40kΩ
400kΩ
4MΩ |
0.1Ω
1Ω
10Ω
100Ω
1kΩ |
±(1.2%rdg+3dgt)
|
|
|
|
40MΩ |
10kΩ |
±(2.0%rdg+4dgt) |
|
Continuity Test |
400Ω |
Audible threshold.: Less than 25Ω. |
|
General
Operating temp & humidity: 0˚~40˚C, 80% Max.
Storage temp & humidity: -10˚~50˚C, 80% Max.
Power source:
- LAN cable tester: 9V battery x 1
- DMM: 1.5V(AAA) x 2.
Dimensions
- Master unit: 168(L) x 82(W) x 44(D)mm,
- Remote receiving unit: 74(L) x 30 (W) x 25(D)mm.
Weight (battery included)
- Master unit: Approx. 283g.
- Remote receiving unit: Approx. 30g.
Safety Standard
EN 61010-1 CAT Ⅲ 600V
EN 61326-1
EN 55011
EN 61000-4-2
EN 61000-4-3.
