Microprocessor-controlled.
Measures Insulation Resistance, voltage (AC-DC) measurements.
Automatic hold facility.
Continuity test with a short circuit current of minimum 200mA.
Energy conservation is feature.
EnerSave™ limits the test duration to about 10 Seconds to save energy.
No moving parts. All calibration are saved internally in a non volatile memory.
Easy calibration at any facility around the world.
Low cost maintenance, calibration, and ownership.
Complies to all the latest regulations, including UK.
Accessories
Instruction manual
Test leads
Shoulder belt
Batteries.
Insulation Resistance
Test voltage (DC V): 250V / 500V / 1000V
Output voltage on open circuit: Rated test voltage +10%
Measuring ranges:
0.2M~2G
0.2M-4G
0.2M-8GΩ
Accuracy:
0.2M~4GΩ: ±3%rdg
4GΩ~8GΩ: ±5%rdg
When voltage is constant, Current is limited at 1.2mA
Short circuit current: 2mA DC
Short circuit current: 4mA Max
Continuity
Range: 0.01-1999Ω
Accuracy:
0.01-100Ω : ±1.0%rdg
100-300Ω : ±1.5%rdg / 300-1999Ω : ±2.0%rdg
Short circuit current: >220mA
Open circuit voltage: 5V dc
Resolution: ±2 counts
Voltmeter
AC voltage (Auto): 0-700V
DC voltage (Auto): 0-950V
Accuracy: ±1.5% rdg
Resolution: ±1V
Protections
Over load: 700V (between all terminals)
Over voltage: Class III-700V towards ground
Fuse: 500mA 250V, (5 × 20mm), HBC, Fast Blow
General
Display: 2 lines × 16 characters LCD
Auto-null threshold: 5Ω
Buzzer threshold: 3Ω
Fast test: 10Sec
Long test: 60Sec
With PI and DAR test function: 10Min
Load battery test current: About 300mA
Operating temperature: 0°C to 40°C
Storage temperature: -10°C to 50°C
Dimensions: 250(L) × 190(W) × 110(D)mm
Weight (battery included): Approx. 1460g
Power source: 1.5V (AA) × 8
Safety Standard
EN 61010-1 CAT III 600V
EN 61326-1