Low-cost, high-performance, miniature snap-in DPM with annunciators.
Snap-in bezel mount eliminates mounting hardware.
Space-saving design: only .5” deep.
Occupies less than 1.75 X .95 inches of front panel space.
3 1/2 digits with high-contrast LCD.
Annunciators and decimal points

Display
Digits: 3 ½ digits (±1999 counts)
Type: 0.38” (9mm) high contrast reflective LCD
Polarity Ind.: automatic, “-” displayed
Decimal Points: 3 position, user-selectable
Over-range: three lower order digits blank for inputs >1999 & < -1999
Hold: available OEM option, contact factory
Annunciators: BAT, °C, °F, ~, m, µ, MΩ, KΩ, V, A, HOLD, user-selectable

Inputs
Ranges: ±200.0mV, ±2.000V
Configuration: bipolar & differential
Protection: ±350 VDC, (±100 VDC on 200 mV range)
Impedance: >1 MΩ, (>1 MΩ on 2V range)

Performance
Conversion Rate: 2.5 per second
Normal Mode Rejection: >30 dB @ 60 Hz
Common Mode Range: ±1 VDC max
Common Mode Rej.: >86 dB
Zero Adjustment: automatic
Warm up: 10 min typical
Temperature Coeff.: ±100 ppm per °C typical

Environment
Operating Range: 0 to 50 °C, Storage Range: -20 to 70 °C

Power Supply
5V powered: +5 VDC (± 5%) at 5 mA
9V powered: +7.2-12 VDC at 300 µA

Mounting: snap-in bezel mount
Connection: 26 pins, in 2 rows

Accessories
PW2-5: Regulated 120V AC to 5V DC Power Supply
PW2-12: Regulated 120V AC to 12V DC Power Supply
CVC: Calibrator

Low-cost, high-performance, miniature snap-in DPM with annunciators.
Snap-in bezel mount eliminates mounting hardware.
Space-saving design: only .5” deep.
Occupies less than 1.75 X .95 inches of front panel space.
3 1/2 digits with high-contrast LCD.
Annunciators and decimal points

Display
Digits: 3 ½ digits (±1999 counts)
Type: 0.38” (9mm) high contrast reflective LCD
Polarity Ind.: automatic, “-” displayed
Decimal Points: 3 position, user-selectable
Over-range: three lower order digits blank for inputs >1999 & < -1999
Hold: available OEM option, contact factory
Annunciators: BAT, °C, °F, ~, m, µ, MΩ, KΩ, V, A, HOLD, user-selectable

Inputs
Ranges: ±200.0mV, ±2.000V
Configuration: bipolar & differential
Protection: ±350 VDC, (±100 VDC on 200 mV range)
Impedance: >1 MΩ, (>1 MΩ on 2V range)

Performance
Conversion Rate: 2.5 per second
Normal Mode Rejection: >30 dB @ 60 Hz
Common Mode Range: ±1 VDC max
Common Mode Rej.: >86 dB
Zero Adjustment: automatic
Warm up: 10 min typical
Temperature Coeff.: ±100 ppm per °C typical

Environment
Operating Range: 0 to 50 °C, Storage Range: -20 to 70 °C

Power Supply
5V powered: +5 VDC (± 5%) at 5 mA
9V powered: +7.2-12 VDC at 300 µA

Mounting: snap-in bezel mount
Connection: 26 pins, in 2 rows

Accessories
PW2-5: Regulated 120V AC to 5V DC Power Supply
PW2-12: Regulated 120V AC to 12V DC Power Supply
CVC: Calibrator