3Ø True RMS (Voltage, Current).
3Ø Power (Active, Reactive, Apparent).
Energy (Active, Reactive, Apparent).
Programmable CT / PT Primary / Secondary.
CT Polarity Error Detection.
Variable Pulse Width Selection.
Single Phase Network with Phase Selection.
Modbus RTU Communication (RS485).
Neutral Current Measurement .
THD Upto 31st Level .
Max Demand for Power.
Single Pulse Output / Demand.
Phase Sequence Detection.
Mounting Type: Panel Mount.
Certification: CE, UL Listed.
Display Specifications.
Display: 4 rows, LCD with Backlight, 4 Digits (Lowest 8 digits for energy display).
Bargraph For Current Representation.
Input Specifications
Electrical Connection: 3Ø - 3 wire, 3Ø - 4 wire, 2Ø - 3 wire, 1Ø - 2 wire.
Input Voltage Range: 11 to 300V AC (L - N) 19 to 519V AC (L - L).
Input Current Range: Nominal 5A AC (Min - 11mA, Max - 6A).
Frequency: 45 to 65Hz.
Display Scrolling: Automatic / Manual (Programmable).
Power Consumption: 8VA max.
Display Reset: Programmable (For energy).
Resolution For energy: 0.01k, 0.1k, 1k, 0.01M, 0.1M, 1M (depending upon CT ratio x PT ratio).
Resolution For Power, Voltage, Current: Auto Resolution.
Resolution For Power Factor: 0.001..
Accuracy: Voltage (L - N / L - L): ±0.5% of F.S. | Current: ±0.5% of F.S. | Power Factor: ±0.01.
Frequency: ±0.1% For L - N Voltage >20V | For L - L Voltage >35V.
Power (Active, Reactive, Apparent): 1%.
Energy (Active, Reactive, Apparent): Class 1.
Memory Retention 10 years (For energy).
Measuring Parameters:
Voltage (L - L / L - N) (Individual / Average),
Current (Individual / Average),
Frequency, Power Factor (Individual / Total),
Active, Reactive & Apparent Power (Individual / Total),
Active, Reactive & Apparent Energy (Individual),
Demand (Min / Max Active Power, Min / Max Reactive Power, Max Apparent Power),
%THD upto 31 Level Max Demand Current,
Neutral Current, Phase Sequence Detection
Supply Voltage: ± 100 to 240V AC, -15% to +12%,50 / 60 Hz ( 5%).
Settable Parameters
CT Primary: 1 / 5A to 10kA (Programmable for any value)
CT Secondary: 1 / 5A (Programmable)
PT Primary: 100V to 500kV (Programmable for any value)
PT Secondary 100V to 500V (Programmable for any value)
Environmental Specifications
Operating Temperature: -10 to 55C | Storage Temperature: -20 to 75C.
Humidity (non - condensing): Up to 85% RH.
Mechanical Specifications
Panel Mounting.
Weight 318gms.
Size: 96 x 96mm.
