Low-cost, high-performance replacement for many OEM DPMs.
4.5 Digit with high-contrast LCD.
Low power: choice of 1.5mA (9V) or 2.6mA (+5V).
Space-saving design: only 1" (25 mm) deep.
Occupies less than 2.5 X 1.1 inches of front panel space.
Snap-in bezel mount eliminates mounting hardware.

Display: Digits: 4 ½ digits (±19999 counts). Type: 0.5" (13mm) 7 segment LCD.

Inputs:
Ranges: ±200.0 mV, ±2.000 V, ±20.00 VDC.
Configuration: single ended for 9V powered, differential for 5V powered.
Protection: ±10 VDC on 200 mV; ±100 VDC on @ 2V; ±350 VDC on 20V range.
Impedance: >100 MΩ on ± 200 mV; (>1 MΩ on 2 V & 20 V range).
Bias Current: 10 pA typical.

Performance:
Accuracy: ±(0.06% fs + 1 count) maximum.
Zero Adjustment: automatic.
Warmup: 10 min typical

Environment: Operating Range: 0 to 50 °C, Storage Range: -20 to 70 °C.

Power Supply
5V powered DPM: +5 VDC (4.65 - 5.35) at 2.6 mA.
9V (±5V) powered: +7.2 to +12 V at 1.5 mA

Mounting: Snap-in Bezel mount.
Connection: HJ4C13 13 Pin Wire Connector.

Accessories
J4C13: 13 Pin Connector / Wire Assembly
PW2-5: Regulated 120V AC to 5V DC Power Supply
PW2-12: Regulated 120V AC to 12V DC Power Supply
CVC: Calibrator

Low-cost, high-performance replacement for many OEM DPMs.
4.5 Digit with high-contrast LCD.
Low power: choice of 1.5mA (9V) or 2.6mA (+5V).
Space-saving design: only 1" (25 mm) deep.
Occupies less than 2.5 X 1.1 inches of front panel space.
Snap-in bezel mount eliminates mounting hardware.

Display: Digits: 4 ½ digits (±19999 counts). Type: 0.5" (13mm) 7 segment LCD.

Inputs:
Ranges: ±200.0 mV, ±2.000 V, ±20.00 VDC.
Configuration: single ended for 9V powered, differential for 5V powered.
Protection: ±10 VDC on 200 mV; ±100 VDC on @ 2V; ±350 VDC on 20V range.
Impedance: >100 MΩ on ± 200 mV; (>1 MΩ on 2 V & 20 V range).
Bias Current: 10 pA typical.

Performance:
Accuracy: ±(0.06% fs + 1 count) maximum.
Zero Adjustment: automatic.
Warmup: 10 min typical

Environment: Operating Range: 0 to 50 °C, Storage Range: -20 to 70 °C.

Power Supply
5V powered DPM: +5 VDC (4.65 - 5.35) at 2.6 mA.
9V (±5V) powered: +7.2 to +12 V at 1.5 mA

Mounting: Snap-in Bezel mount.
Connection: HJ4C13 13 Pin Wire Connector.

Accessories
J4C13: 13 Pin Connector / Wire Assembly
PW2-5: Regulated 120V AC to 5V DC Power Supply
PW2-12: Regulated 120V AC to 12V DC Power Supply
CVC: Calibrator