Low-cost, high-performance, replacement for many OEM DPMs.
Mounting choices: Snap-in bezel mount eliminates mounting hardware.
Low power: choice of 180µA (9V, ±5V) or 2.5mA (+5V).
Space-saving design: only 1" (25 mm) deep.
Occupies less than 2.5 X 1.1 inches of front panel space.
3 1/2 digits with high-contrast LCD .
Optional loop-powered 4 to 20mA process inputs available: (See LPI-J1).

Display: Digits: 3 ½ digits (±1999 counts), Type: 0.5" (13mm) 7 segment reflective LCD

Inputs
Ranges: ±200.0mV, ±2.000V, ±20.00V DC
Configuration: bipolar & differential
Protection: 250 VDC or 150 V RMS continuous, 300 V intermittent max
Impedance: >10 MΩ, (>1 MΩ on 20 V range)

Performance
Conversion Rate: 2.5 per second
Zero Adjustment: automatic
Warmup: 10 min typical
Temperature Coeff.: ±100 ppm per °C typical

Environment: Operating Range: 0 to 50 °C, Storage Range: -20 to 70 °C

Power Supply
5V powered: +5 VDC (±5%) at 2.5 mA
9V(±5V) powered: +7.2 to +12 V at 180 µA
Optional Backlight: +5 VDC at 100 mA typical

Mounting: Snap-in bezel mount

Connection: H5W, H5B, H5S: 13 pins, 0.025" square on 0.1" centers - pin 3 missing

Accessories
J1C4: 4 Pin Connector / Wire Assembly
J1C13: 13 Pin Connector / Wire Assembly
PW2-5: Regulated 120V AC to 5V DC Power Supply
PW2-12: Regulated 120V AC to 12V DC Power Supply
CVC: Calibrator

Low-cost, high-performance, replacement for many OEM DPMs.
Mounting choices: Snap-in bezel mount eliminates mounting hardware.
Low power: choice of 180µA (9V, ±5V) or 2.5mA (+5V).
Space-saving design: only 1" (25 mm) deep.
Occupies less than 2.5 X 1.1 inches of front panel space.
3 1/2 digits with high-contrast LCD .
Optional loop-powered 4 to 20mA process inputs available: (See LPI-J1).

Display: Digits: 3 ½ digits (±1999 counts), Type: 0.5" (13mm) 7 segment reflective LCD

Inputs
Ranges: ±200.0mV, ±2.000V, ±20.00V DC
Configuration: bipolar & differential
Protection: 250 VDC or 150 V RMS continuous, 300 V intermittent max
Impedance: >10 MΩ, (>1 MΩ on 20 V range)

Performance
Conversion Rate: 2.5 per second
Zero Adjustment: automatic
Warmup: 10 min typical
Temperature Coeff.: ±100 ppm per °C typical

Environment: Operating Range: 0 to 50 °C, Storage Range: -20 to 70 °C

Power Supply
5V powered: +5 VDC (±5%) at 2.5 mA
9V(±5V) powered: +7.2 to +12 V at 180 µA
Optional Backlight: +5 VDC at 100 mA typical

Mounting: Snap-in bezel mount

Connection: H5W, H5B, H5S: 13 pins, 0.025" square on 0.1" centers - pin 3 missing

Accessories
J1C4: 4 Pin Connector / Wire Assembly
J1C13: 13 Pin Connector / Wire Assembly
PW2-5: Regulated 120V AC to 5V DC Power Supply
PW2-12: Regulated 120V AC to 12V DC Power Supply
CVC: Calibrator