Low-cost, high-performance, miniature snap-in DC Voltmeter with annunciators and decimal points.
● Space-saving design: only .5” deep.
● Occupies less than 1.75 X .95 inches of front panel space.
● 3 1/2 digits with high-contrast LCD.
● Power Supply: 5V powered: +5 VDC (± 5%) at 5 mA | 9V powered: +7.2-12 VDC at 300 µA.
● Operating / Storage Range: 0 to 50 °C / -20 to 70 °C.
● Mounting: snap-in bezel mount eliminates mounting hardware.
● Connection: 26 pins, in 2 rows.
Display
● 3 ½ digits (±1999 counts). Type: 0.38” (9mm) high contrast reflective LCD.
● Polarity Ind.: automatic, “-” displayed.
● Decimal Points: 3 position, user-selectable.
● Over-range: three lower order digits blank for inputs >1999 & < -1999.
● Hold: available OEM option, contact factory.
● Annunciators: BAT, °C, °F, ~, m, µ, MΩ, KΩ, V, A, HOLD, user-selectable.
Inputs
● Ranges: ±200.0mV, ±2.000V.
● Configuration: bipolar & differential.
● Protection: ±350 VDC, (±100 VDC on 200 mV range).
● Impedance: >1 MΩ, (>1 MΩ on 2V range).
Performance
● Conversion Rate: 2.5 per second.
● Normal Mode Rejection: >30 dB @ 60 Hz.
● Common Mode Range: ±1 VDC max.
● Common Mode Rej.: >86 dB.
● Zero Adjustment: automatic.
● Warm up: 10 min typical.
● Temperature Coeff.: ±100 ppm per °C typical.