Low-cost, high-performance replacement for many OEM DPMs.
Optional Red, Green, Amber or Positve Green backlighting.
Snap-in bezel mount eliminates mounting hardware.
Resistant to RF and EMI.
3 1/2 digits with high-contrast LCD .
User-selectable, displayed engineering units.

Display:
Digits: 3.5 digits (±1999 counts). Type: 0.45"(11.4 mm) 7 segment LCD.
Backlighting Optional: Red Negative | Green Negative | Amber Negative | Green Positive.
Polarity: automatic, “-” displayed.
Annunciators: °F, °C, PSI, %, user-selectable.
Decimal Points: 3 position, user-selectable.
Overrange: three lower order digits blank for inputs >1999.

Inputs
Ranges: ±200.0mV, ±2.000V, ±20.00V DC.
Configuration: bipolar differential.
Protection: ±350 VDC, (±100 VDC on 200 mV range).
Impedance: 1000 MΩ on ± 200 mV; (1 MΩ on 2 V & 20 V range).
Bias Current: 1 pA ( ± 200 mV) , 100 pA (other ranges).

Performance:
Accuracy: ± (0.1% fs + 2 count).
Conversion Rate: 3 per second.
Normal Mode Rejection: >30 dB @ 60 Hz.
Common Mode Range: ±1 VDC max | Common Mode Rej.: >86 dB.
Zero Adjustment: automatic.
Warmup: 10 minutes typical.
Temperature Coeff.: ±100 ppm per °C typical.

Power Supply
5 VDC at 3.5 mA max.
Optional Backlight: 24 VDC at 35 mA, 5 VDC at 130mA typical.

Environment: Operating Range: 0 to 50 °C, Storage Range: -20 to 70 °C.

Mounting: snap-in bezel mount.
Connection: 13 pins, 0.025" square.

Accessories
J4C13: 13 Pin Connector / Wire Assembly.
PW2-5: Regulated 120V AC to 5V DC Power Supply.
PW2-24: Regulated 120V AC to 24V DC Power Supply.
CVC: Calibrator.

Low-cost, high-performance replacement for many OEM DPMs.
Optional Red, Green, Amber or Positve Green backlighting.
Snap-in bezel mount eliminates mounting hardware.
Resistant to RF and EMI.
3 1/2 digits with high-contrast LCD .
User-selectable, displayed engineering units.

Display:
Digits: 3.5 digits (±1999 counts). Type: 0.45"(11.4 mm) 7 segment LCD.
Backlighting Optional: Red Negative | Green Negative | Amber Negative | Green Positive.
Polarity: automatic, “-” displayed.
Annunciators: °F, °C, PSI, %, user-selectable.
Decimal Points: 3 position, user-selectable.
Overrange: three lower order digits blank for inputs >1999.

Inputs
Ranges: ±200.0mV, ±2.000V, ±20.00V DC.
Configuration: bipolar differential.
Protection: ±350 VDC, (±100 VDC on 200 mV range).
Impedance: 1000 MΩ on ± 200 mV; (1 MΩ on 2 V & 20 V range).
Bias Current: 1 pA ( ± 200 mV) , 100 pA (other ranges).

Performance:
Accuracy: ± (0.1% fs + 2 count).
Conversion Rate: 3 per second.
Normal Mode Rejection: >30 dB @ 60 Hz.
Common Mode Range: ±1 VDC max | Common Mode Rej.: >86 dB.
Zero Adjustment: automatic.
Warmup: 10 minutes typical.
Temperature Coeff.: ±100 ppm per °C typical.

Power Supply
5 VDC at 3.5 mA max.
Optional Backlight: 24 VDC at 35 mA, 5 VDC at 130mA typical.

Environment: Operating Range: 0 to 50 °C, Storage Range: -20 to 70 °C.

Mounting: snap-in bezel mount.
Connection: 13 pins, 0.025" square.

Accessories
J4C13: 13 Pin Connector / Wire Assembly.
PW2-5: Regulated 120V AC to 5V DC Power Supply.
PW2-24: Regulated 120V AC to 24V DC Power Supply.
CVC: Calibrator.