Space saving design only 0.67”(17mm) deep.
Occupies less than 2.5 x 1.1 inches of front panel space.
High contrast LCD.
3½ digits with 0.39” LCD.
Snap-In bezel eliminates the need for mounting hardware.
Low power requirement (3mA) is ideal for battery powered applications.
User-selectable Decimal Points.

Display:
Digits: 3 ½ digits (±1999 counts). Type: 0.39” (10mm) high contrast reflective LCD
Polarity Ind.: automatic, “-” displayed
Decimal Points: 3 position, user-selectable
Overrange: three lower order digits blank for inputs >1999 & < -1999
Hold: display hold function is standard

Inputs
Ranges: ±200.0mV, ±2.000V, ±20.00V DC
Configuration: bipolar & differential
Protection: ±350 VDC, (±100 VDC on 200 mV range)
Impedance: >1 MΩ, (>10 MΩ on 200 mV range)

Performance:
Accuracy: ±(0.1% +1 count) typical | ±(0.2% + 2 counts) maximum
Conversion Rate: 3 per second
Normal Mode Rejection: >30 dB @ 60 Hz
Common Mode Range: ±1 VDC max | Common Mode Rej.: >86 dB
Zero Adjustment: automatic
Warmup: 10 min typical
Temperature Coeff.: ±100 ppm per °C typical

Environment: Operating Range: 0 to 50 °C, Storage Range: -20 to 70 °C.

Power Supply: Voltage: +5 VDC (±5%) | Current: 3 mA

Mounting: Snap-in bezel eliminates the need for mounting hardware.
Connection: HJ1C10 10 pin wire Connector.

Accessories
C10-5: 5" - 10 Pin Connector / Wire Assembly
J1C10: 12" - 10 Pin Connector / Wire Assembly
PW2-5: Regulated 120V AC to 5V DC Power Supply
CVC: Calibrator

Space saving design only 0.67”(17mm) deep.
Occupies less than 2.5 x 1.1 inches of front panel space.
High contrast LCD.
3½ digits with 0.39” LCD.
Snap-In bezel eliminates the need for mounting hardware.
Low power requirement (3mA) is ideal for battery powered applications.
User-selectable Decimal Points.

Display:
Digits: 3 ½ digits (±1999 counts). Type: 0.39” (10mm) high contrast reflective LCD
Polarity Ind.: automatic, “-” displayed
Decimal Points: 3 position, user-selectable
Overrange: three lower order digits blank for inputs >1999 & < -1999
Hold: display hold function is standard

Inputs
Ranges: ±200.0mV, ±2.000V, ±20.00V DC
Configuration: bipolar & differential
Protection: ±350 VDC, (±100 VDC on 200 mV range)
Impedance: >1 MΩ, (>10 MΩ on 200 mV range)

Performance:
Accuracy: ±(0.1% +1 count) typical | ±(0.2% + 2 counts) maximum
Conversion Rate: 3 per second
Normal Mode Rejection: >30 dB @ 60 Hz
Common Mode Range: ±1 VDC max | Common Mode Rej.: >86 dB
Zero Adjustment: automatic
Warmup: 10 min typical
Temperature Coeff.: ±100 ppm per °C typical

Environment: Operating Range: 0 to 50 °C, Storage Range: -20 to 70 °C.

Power Supply: Voltage: +5 VDC (±5%) | Current: 3 mA

Mounting: Snap-in bezel eliminates the need for mounting hardware.
Connection: HJ1C10 10 pin wire Connector.

Accessories
C10-5: 5" - 10 Pin Connector / Wire Assembly
J1C10: 12" - 10 Pin Connector / Wire Assembly
PW2-5: Regulated 120V AC to 5V DC Power Supply
CVC: Calibrator