Large,1”, 3 1/2 digit display.
Standard 1/8 DIN package.
User-selectable decimal points.
User-selectable engineering units.
Snap-in panel mounting - no tools or hardware required.
13-pin connector / wiring harness included.
Gasket and clamp provided for NEMA 4, NEMA 12, & IP66 applications.
Display:
Digits: 3 ½ digits (±1999 counts). Type: 1” ( 24.9 mm) high contrast LCD
Polarity Ind.: automatic, “-” displayed
Decimal Points: 3 position, user-selectable
Overrange: three lower order digits blank for inputs >1999 & < -1999
Hold: available OEM option, contact factory
Annunciators: PSI, °F, °C, % user-selectable.
Inputs
Ranges: ±200.0 mV, +/-2.000 V, +/-20.00 VDC
Configuration: bipolar & differential
Protection: ±350 VDC, (±100 VDC on 200 mV range)
Impedance: >1 MΩ, (>10 MΩ on 200 mV range)
Performance:
Accuracy: ±(0.05% FS +1 counts)
Conversion Rate: 3 per second
Normal Mode Rejection: >30 dB @ 60 Hz
Common Mode Range: ±1 VDC max | Common Mode Rej.: >86 dB
Zero Adjustment: automatic
Warmup: 10 min typical
Temperature Coeff.: ±100 ppm per °C typical
Environment: Operating Range: -10 to 50 °C, Storage Range: -40 to 75 °C.
Power Supply: 5V powered: +5 VDC (±5%) 3 mA @ 5 V
Mounting: Snap-in Bezel mount - no tools or hardware required.
Connection: HJ4C13 13 Pin Wire Connector, wiring harness included.
Part Number |
Meter Input |
Mounting |
|
HDMO-801 HDMO-802 HDMO-803
|
200mV 2V 20V
|
Snap-in panel mounting - no tools or hardware required |
|
Accessories
J4C13: 13 Pin Connector / Wire Assembly
PW2-5: Regulated 120V AC to 5V DC Power Supply
CVC: Calibrator