Low-cost, high-performance replacement for many OEM DPMs.
Optional Red, Green, Amber or Pos Green backlighting.
Snap-in bezel mount eliminates mounting hardware.
Resistant to RF and EMI.
4½ digits with high-contrast LCD.
4-20 mA loop powered input.
User selectable, displayed engineering units.
Clamp and gasket for NEMA applications.
Display:
Digits: 4 ½ digits (±19999 counts). Type: 0.45" (11.4 mm) 7 segment LCD
Optional Red, Green, Amber or Pos Green backlit LCD.
Polarity Ind.: automatic, “-” displayed
Annunciators: °F, °C, PSI, %, user-selectable
Decimal Points: 4 position, user-selectable
Overrange: 4 lower order digits blank for inputs >1999 & < -1999
Inputs
Ranges: 4-20 mA DC
Configuration: bipolar differential
Impedance: 300Ω
Performance:
Accuracy: ±(0.1% fs + 2 count)
Conversion Rate: 3 per second
Normal Mode Rejection: >30 dB @ 60 Hz
Common Mode Range: ±1 VDC (5 V powered) | Common Mode Rej.: >86 dB
Warmup: 10 min typical
Temperature Coeff: ±100 ppm per °C typical
Environment: Operating Range: 0 to 50 °C, Storage Range: -20 to 70 °C.
Power Supply: powered by the milliamp control loop. Optional Backlight: 24 VDC at 35 mA.
Mounting: nap-in panel mount or clamp and gasket
Connection: 2 screw terminal (4 with backlight).
Part Number |
Backlight Color |
Backlight Power |
Mounting |
|
HLPI-4‐XEC HLPI-4A‐XEC HLPI-4G‐XEC HLPI-4GP‐XEC HLPI-4R‐XEC
|
NO BACKLIGHT NEG AMBER NEG GREEN POS GREEN NEG RED
|
NONE 24VDC 24VDC 24VDC 24VDC
|
Snap in or clamp and gasket
|
|
Accessories
PW2-24: Regulated 120V AC to 24V DC Power Supply
PW1.0: 24V AC to adjustable DC output
PW1.5: 24V AC to adjustable DC output
CVC: Calibrator