Digital Panel Meter with 4.5 digits high-contrast LCD.
4-20 mA loop powered input.
User-selectable, displayed engineering units.

Display
Digits: 4.5 digits (±19999 counts). Type: 0.45" (11.4 mm) 7 segment LCD.
Backlighting Optional: Red Negative | Green Negative | Amber Negative | Green Positive.
Polarity: automatic, “-” displayed
Annunciators: °F , °C, PSI, % user-selectable or V , A, KW, PF
Decimal Points: 4 position, user-selectable
Overrange: four lower order digits blank for inputs >19999 & < -19999

Inputs
Ranges: 4-20 mA DC
Configuration: bipolar differential
Impedance: 300 nominal @ 20 mA

Performance:
Accuracy: (0.1% fs + 2 count)
Conversion Rate: 3 per second
Normal Mode Rejection: >30 dB @ 60 Hz
Adjustments: span (gain) and zero (offset) with course setting.
Warmup: 10 minutes typical
Temperature Coeff.: 100 ppm per °C typical

Environment: Operating Range: 0 to 50 °C, Storage Range: -10 to 70 °C.

Power Supply: powered by the milliamp control loop.
Optional Backlight: 24 VDC at 35 mA typical.

Mounting: snap-in bezel mount.
Connection: 2 screw terminal (4 with backlight).

Digital Panel Meter with 4.5 digits high-contrast LCD.
4-20 mA loop powered input.
User-selectable, displayed engineering units.

Display
Digits: 4.5 digits (±19999 counts). Type: 0.45" (11.4 mm) 7 segment LCD.
Backlighting Optional: Red Negative | Green Negative | Amber Negative | Green Positive.
Polarity: automatic, “-” displayed
Annunciators: °F , °C, PSI, % user-selectable or V , A, KW, PF
Decimal Points: 4 position, user-selectable
Overrange: four lower order digits blank for inputs >19999 & < -19999

Inputs
Ranges: 4-20 mA DC
Configuration: bipolar differential
Impedance: 300 nominal @ 20 mA

Performance:
Accuracy: (0.1% fs + 2 count)
Conversion Rate: 3 per second
Normal Mode Rejection: >30 dB @ 60 Hz
Adjustments: span (gain) and zero (offset) with course setting.
Warmup: 10 minutes typical
Temperature Coeff.: 100 ppm per °C typical

Environment: Operating Range: 0 to 50 °C, Storage Range: -10 to 70 °C.

Power Supply: powered by the milliamp control loop.
Optional Backlight: 24 VDC at 35 mA typical.

Mounting: snap-in bezel mount.
Connection: 2 screw terminal (4 with backlight).