Loop-powered digital DC Ammeter with a large 1”, 3 1/2 digit display for easy viewing.
● User-selectable decimal points & engineering units.
● Standard 1/8 DIN package.
● Wide ZERO (Offset) & SPAN (Gain) adjustment.
● Gasket and clamp provided for NEMA 4, NEMA 12, & IP66 applications.
● Mounting: Snap-in panel mounting or clamp and gasket (included).
● Connection: screw terminals.
● Operating / Storage Range:-10 to 50 °C / -10 to 75 °C.
● Power Supply: Loop Powered. 300Ω nominal at 20mA (LPI).
● Voltage Controlled: 10mA at 12V (9 to 16V) or 24V (16 to 32V) (VPI).
● Backlighting: 35mA typical @ 24vdc.

Display:
● Type: 3 1/2 digits (±1999 counts), 1” (24.9 mm) high contrast LCD.
● Backlighting: Red, Green, Orange or Blue.
● Overrange: three lower order digits blank.
● Polarity: automatic, “-” displayed.
● Decimal Points: 3 position, user selectable.
● Annunciators: °F, °C, PSI, %, user selectable or V, A, KW, PF.
Inputs:
● Voltage Ranges: 200mV, 5V, 10V (VPI).
● Current Range: 4 to 20mA (LPI).
● Configuration: single ended (VPI).
● Impedance: 390KΩ (VPI).
Performance:
● Accuracy: ±(0.05% of full scale + 1 count).
● Conversion Rate: 3 per second.
● Normal Mode Rejection: >30 dB @ 60 Hz.
● Warmup: 10 minutes typical.
● Temperature Coeff.: ±100 ppm per °C typical.
Adjustments:
● 25 turn potentiometers.
● Offset Range: -1999 to +1999.
● Gain Range: 1 to 1999 (custom ranges available).