HPD-28 High Voltage Probe for Multimeter measures both AC and DC voltages. It consists of 2 kinds of contact tips, a test clip for the ground, a set of test leads for a multimeter and a high quality enclosure.
The enclosure has very good insulation properties.
They are light-weight and rugged.
2 kinds of contact tips are available.
One is a round specialflat spring type for a CRT anode.
Meets IEC/EN 61010-1, IEC/EN 61010-2-031.
Before taking any measurements, first connect the alligator clip of this probe to earth ground and make sure connection is proper.
Input impedance: 1000 MΩ.
Attenuation ratio: 1000 : 1.
Accuracy: DCV (0 ~ 20kV) ± 1%, DCV (20kV ~ 40kV) ± 2%, ACV (0 ~ 28kV) typically ± 5% at 50/60 Hz.
Max. working voltage: 40kV DC or 28kV AC.
General
Operating temperature: 0°C ~ 40°C.
Storage temperature: -10°C ~ 50°C.
Cable length: 1 m.
Weight: Approx. 260g.
Safety standards: EN 61010-1, EN 61010-31, EN 61326-1.