Low-cost, high-performance replacement for many OEM DPMs.
Optional Red, Green, Amber or Pos Green backlighting.
Snap-in bezel mount eliminates mounting hardware.
Resistant to RF and EMI.
3 1/2 digits with high-contrast LCD.
12V or 24V DC voltage-powered.
User-selectable, displayed engineering units.
Display:
Digits: 3.5 digits (±1999 counts). Type: 0.45" (11.4 mm) 7 segment LCD.
Backlight Optional: Red Negative | Green Negative | Amber Negative | Green Positive.
Polarity: automatic, “-” displayed.
Annunciators: °F, °C, PSI, %, user-selectable or V, A, KW, PF.
Decimal Points: 3 position, user selectable.
Overrange: three lower order digits blank for inputs >1999 & < -1999.
Inputs
Ranges: 0-10 VDC, 0-5 VDC or 0-200 mV DC.
Configuration: single ended.
Impedence: 390 KΩ min.
Performance:
Accuracy: ±(0.1% fs + 2 count).
Conversion Rate: 3 per second.
Normal Mode Rejection: >30 dB @ 60 Hz.
Warmup: 10 minutes typical.
Temperature Coeff.: ± 100 ppm per °C typical.
Adjustments: span (gain) (2) (10V and 5V) and zero (offset).
Offset Range: -1999 to +1999.
Gain Range: 1-2000 counts above adjusted zero.
Environment: Operating Range: 0 to 50 °C, Storage Range: -10 to 60 °C.
Power Supply: 12 VDC or 24 VDC regulated (selectable).
Optional Backlight: 24 VDC at 35 mA typical.
Mounting: Snap-in Bezel mount.
Connection: 4 screw terminal (6 with backlight).
Part Number |
Backlight Color |
Backlight Power |
Mounting |
|
HVPI-3E
HVPI-3EAN
HVPI-3EGN
HVPI-3ERN
HVPI-3EGP
|
NO BACKLIGHT
NEG AMBER
NEG GREEN
NEG RED
POS GREEN
|
NONE
24VDC
24VDC
24VDC
24VDC
|
Snap in
|
|
HVPI-3PE
HVPI-3PEAN
HVPI-3PEGN
HVPI-3PERN
HVPI-3PEGP
|
NO BACKLIGHT
NEG AMBER
NEG GREEN
NEG RED
POS GREEN
|
NONE
24VDC
24VDC
24VDC
24VDC
|
Snap in, with power engineering units
|
|
Accessories
PW2-12: Regulated 120V AC to 12V DC Power Supply.
PW2-24: Regulated 120V AC to 24V DC Power Supply
CVC: Calibrator
