Low-cost, high-performance replacement for many OEM DPMs.
Optional Red, Green, Amber or Positive Green backlighting.
Snap-in bezel mount eliminates mounting hardware.
Resistant to RF and EMI.
4 1/2 digits with high-contrast LCD.
12V or 24V DC voltage-powered.
User-selectable, displayed engineering units.
Display
Digits: 4 ½ digits (±19999 counts). Type: 0.45" (11.4 mm) 7 segment LCD
Backlighting Optional: Red Negative | Green Negative | Green Positive
Polarity Ind.: automatic, “-” displayed
Annunciators: °F, °C, PSI, %, user-selectable or V, A, KW, PF
Decimal Points: 4 position, user-selectable
Overrange: FOUR lower order digits blank for inputs >1999 & < -1999
Inputs
Ranges: 0-10 VDC, 0-5 VDC or 0-200 mV DC
Configuration: single ended
Impedance: 390KΩ min.
Performance:
Accuracy: ± (0.1% fs + 2 count)
Conversion Rate: 3 per second
Normal Mode Rejection: >30 dB @ 60 Hz
Warmup: 10 min typical
Temperature Coeff: ±100 ppm per °C typical
Offset Range: -19999 to +19999
Gain Range: 1-20000 counts above adjusted zero
Environment: Operating Range: 0 to 50 °C, Storage Range: -10 to 60 °C.
Power Supply:: 12 VDC or 24 VDC regulated (selectable), Optional Backlight: 24 VDC at 35 mA
Mounting: Snap-in Bezel mount
Connection: 4 screw terminal (6 with backlight)
Part Number |
Backlight Color |
Backlight Power |
Mounting |
|
HVPI-4E
HVPI-4EAN
HVPI-4EGN
HVPI-4ERN
HVPI-4EGP
|
NO BACKLIGHT
NEG AMBER
NEG GREEN
NEG RED
POS GREEN
|
NONE
24VDC
24VDC
24VDC
24VDC
|
Snap in
|
|
HVPI-4PE
HVPI-4PEAN
HVPI-4PEGN
HVPI-4PERN
HVPI-4PEGP
|
NO BACKLIGHT
NEG AMBER
NEG GREEN
NEG RED
POS GREEN
|
NONE
24VDC
24VDC
24VDC
24VDC
|
Snap in with power engineering units
|
|
Accessories
PW2-12: Regulated 120V AC to 12V DC Power Supply.
PW2-24: Regulated 120V AC to 24V DC Power Supply.
CVC: Calibrator
