Accepts current, voltage, or resistance making it ideal for RTD's or thermocouples
Sub-ranges can be set within the nominal measuring ranges to maintain accuracy for those niche applications
Programming can be handled through the front, panel, RS-485, ethernet connection
Inputs: -200mV to 200mV, -24V to 24V, -20mA to 20mA, 0 to 5500Ω
Outputs: 4-20mA or 0-10V (Choose Option)
Relays: 1 or 2 relays (Choose Option)
Power: 85 to 250VAC/VDC, 20 to 60VAC/VDC (Choose Option)
Operating Temperature: -25°C to 55°C / -13°F to 131°F
Converting measured values into any output signal based on an individual linear characteristic.
Calculating measured values using one of five implemented mathematical functions.
Calculating measured values based on a 21-point individual characteristics.
One or two NO (normaly open) relay alarms operating in 6 modes auxiliary power supply 24V DC 30mA switched on/off by software (options).
Indication of exceeding the alarm values set.
Programming alarm and analog outputs with a reaction to selected.
Input value (main input, auxiliary input or RTC).
Real time clock (RTC) with independent battery supply.
Recording the input signals in programmed time periods in the internal memory and on an SD/SDHC card (option).
Internal archive memory with 534336 record capacity.
Automatic decimal point setting.
Preview of preset parameters.
Password protected parameter change.
RS-485 interface support with the MODBUS protocol in RTU mode.
Programmable averaging time.
Median filter with various number of samples.
SD/SDHC memory cards support – compatible with FAT and FAT32 file system (option).
RS-485 interface Master mode – ability to poll a single slave device.
RS-485 interface Monitor mode – ability to monitor transmission on RS-485 interface and react to the value of the selected register.
10/100 BASE-T Ethernet interface (option):
- protocol: Modbus TCP/IP, HTTP, FTP
- services: WWW server, FTP server, DHCP client.
