The high voltage proving unit for high voltage testers is utilized to determine if the devices under test are functionally working and can be utilized to proof contact devices on a momentary basis (press on, check, release). The unit is not a calibrator and can’t be utilized for calibration.
Designed to proof:
- Phasing Sticks
- High voltage detectors (contact type only, not to be used with non contact proximity detectors.)
- High voltage and voltage testers.
Battery operated.
Led indicates when power is “ON”.
Small and hand-held.
Quick connection with normal 4mm test leads.
Voltage settings (Internal Jumpers Selectable): 500Vdc / 1000Vdc / 2500Vdc / 5000Vdc (default setting).
Over-current protection: Yes.
Power on indicator: Yes.
General
Operating temperature: -5°C to 45°C.
Storage temperature: -10°C to 55°C.
Dimensions: 205(L) × 90(W) × 55(D)mm.
Weight (battery included): Approx. 510g.
Power source: 1.5V (AA) × 6 or equivalent.
Accessories
Test Leads,
Carry Case,
Batteries.
