Welcome to Hoyt Meter!
Call Toll Free: 1-800-258-3652

1021 TK Electrical Test Kit

1021 TK Electrical Test Kit

SKU: 1021TK

2950 CL - Pocket size AC Clamp Meter with DCV function
● 4000 counts.
● Full automatic Voltage, Current & Resistor measurement.
● Data hold function.
● Continuity check.
● Diode measurement.
● Select function.
● Low battery indication.
● Auto off function.
● Flashlight (auto off in 1 minute).
● ACA: 40A. 400/1000A.
● ACV: 4V. 40V. 400V. 750V.
● DCV: 4V. 40V. 400V. 1000V.
● Resistance: 400Ω. 4kΩ. 40kΩ. 400kΩ. 4MΩ. 40MΩ.
● Continuity: Threshold level (beep sound) less than 25Ω.

ALS-2 AC Line Separator
● Use with any clamp meter.
● x10 mode allows for more accurate measurements of low amperage devices.
● x1 mode allows for direct reading.
● 4mm voltmeter input jacks.
● Integrated ground conductor.
● 10 amp capacity.
● 10cm plug cord for greater flexibility.
● Input plug: Europe.
● Output socket: 3 prong U.S. standard.
● Max. Voltage / Ampere rating: 250Vac(±10%) / 10AAC.
● Operating Temperature & Relative Humidity: 0℃~50℃ Max.80%R.H.
● Weight: Approx. 135g.
● Dimensions: 145(L) x 55(W) x 35(D)mm.

Specifications
● Overload Protection: AC V 750Vrms. DC V 1000V. Diode & ohm 250Vrms.
● Conductor size: 35mm Max.
● Response time: Approx. 2 times per second.
● Operating /Storage Temp & humidity: 0~40ºC /-10~50ºC, 80% R.H. max.
● Battery life: Approx.100 hours on continuous use.
● Dimensions: 183(L) × 62(W) × 20(D)mm.
● Weight (battery Included): Approx. 123g.
● Power source: CR 2032 (DC 3V) × 1.
● Safety Standard: EN 61010-1 CAT II 600V CAT III 300V. EN 61010-2-32. EN 61326-1.

Documentation
Documentation