No batteries required.
Every circuit is doubled.
Buzzer indicates voltage detected. Led indicates voltage detected.
Neon scale indicates voltage.
Dual HBC fuses.
High grade fiber glass probes. Super polished fiber glass.
High strength connecting cord.
Heavy duty rated.
Replaceable tips. Choice of tips available.
Lightweight. Small storage space.
Strong strength reliefs.
Double poles non-polarized.
Suitable for 45 to 70 Hz networks.
Contact detector type.
Passive circuitry.
Fiber glass 1.6mm - CU 35um PCB.
Super bright neon lights and LEDs.
Ergonomically-designed.
Applications
Measure and confirm Overhead Voltage between Lines in all Safety due to the clearance from the probes contacts. This is done when, for example, using a bucket on a truck, then from the bucket, you can reach all the phases and check voltage between each phases.
Check voltage Presence between two conductors or between Phase and Earth.
Measure and Detect Voltage between Bus bars and between Bus bar Earth.
Use where you are not comfortable with your normal test leads.
Tips can be changed for different types.
Available tips: Fork type, Piercing through Insulation, Cone, Flat tip, Other on Demand.
Poles: Fiber Glass.
Handles: Rubber.
Body: ABS.
Maximum Rating between Poles: 450V.
Category: IV.
Fuses
Type: HBC/HRC.
Rate of Rupture: Slow Blow.
Current Rating: 500mA.
Voltage Rating: 600V.
Quantity: 2.
Voltmeter
The Neon Voltage Scale Indication
Neon lit when Voltage > or =: 110V.
Neon lit when Voltage > or =: 220V.
Neon lit when Voltage > or =: 280V.
Neon lit when Voltage > or =: 415V.
Accuracy on both voltage display: ±20% of Rdg.
Voltage Detector with LED. Led Lit when Voltage between Probes > 25V ±20V.
Voltage Detector with Buzzer: Buzzer Sounds when Voltage on tips > 25V ±20V
General:
Operating / Storage Temperature: 1ºC to +55ºC / -20ºC to +70ºC
Total Length: 1000m/m. | Fiber Glass Length: 795 m/m.
Weight: 700g.
Safety standard: EN 61010-031 CAT IV 500V.
